Soft slat Venetian system
Fabric Venetian Blinds
Soft fabric slats combine directional Venetian-style light control with a warmer textile appearance for residential, hospitality and selected office interiors.
- Soft fabric slat direction
- Selected 35 mm or 50 mm series
- Manual or selected motorized tilt
Approval task / slat direction / sample decision
Choose the sample around the decision you need to approve
Fabric Venetian blinds use soft horizontal fabric slats to direct light and privacy while keeping a textile appearance. The documented 35 mm and 50 mm directions are project and sample choices, not a universal performance ranking.
35 mm direction
Use this route when a finer slat scale is the design direction. Confirm the exact fabric, color, opacity, headrail and operation from the current sample.
50 mm direction
Use this route when a wider slat scale is the design direction. Confirm the exact fabric, color, opacity, headrail and operation from the current sample.
Approval task: decide whether you need a color and texture check, opacity review, slat-scale comparison or motorized-tilt discussion before quotation.
Related paths: Motorized Blinds Sample Kit, Dealer Support and the Products Hub.
Product fit / system snapshot
Directional slat control with a softer material expression
Fabric Venetian blinds retain adjustable horizontal slats but replace the harder metal look with textile material. Slat series, opacity, color, headrail and tilt/lift operation are confirmed for the opening.
- Material
- Soft fabric slats selected from the current collection.
- Light control
- Adjustable slat angle changes daylight and privacy direction.
- Series
- Documented current series include 35 mm and 50 mm directions.
- Configuration
- Material, slat width, size, headrail, operation and control are reviewed together.
Installed / application evidence
Review the product in real application conditions
These approved images are product and application references. They do not imply a Saiwenna-completed customer project unless separately documented.
Material / component direction
Fabric slat, opacity and color direction
Select fabric slat width, visible texture, opacity and color from the current series. Final material and any room-darkening direction must be confirmed by exact sample.
Final material, performance and configuration claims are tied to the selected series and approved project inputs.
Configuration & technical specification
One configuration framework for the selected product build
This table defines what must be confirmed; it is not a universal model datasheet.
| Product type | Fabric Venetian / soft fabric slat blind |
|---|---|
| Slat direction | Selected current-series 35 mm or 50 mm product |
| Material | Confirmed fabric slat construction and opacity |
| Operation | Manual tilt/lift or selected motorized tilt configuration |
| Size | Custom size confirmed from material, slat, headrail, motor and opening |
| Control | Manual, selected remote or mapped project control configuration |
Motor & control
One control section with exact system boundaries
Operation and integration depend on the selected product, motor, power, controller or gateway and project-side architecture.
Application fit
Where this product direction is usually considered
Residential
Living rooms, bedrooms, apartments and villas needing a softer slat finish.
Hospitality
Guest rooms, suites and lounge interiors with material-led design.
Office
Meeting rooms and selected offices where a textile slat is preferred.
Designer projects
Showrooms and interior schemes requiring color-card and sample approval.
Sample / finish / material support
Confirm the soft slat material by sample
Use the existing color-card preview for direction, then request the relevant material sample when texture, opacity, slat width or motorized tilt affects approval.
What we need for quotation
Send one clear product and project brief
A structured schedule keeps material, hardware, operation, controls, packing and destination aligned.
- OpeningsWidth, height, quantity, room type and mounting.
- Slat35 mm or 50 mm series direction, opacity and color.
- HardwareHeadrail, visible finish, tilt/lift and installation condition.
- ControlManual or motorized direction, power and control request.
- SupplySample need, labeling, packing and destination.
Supply process
Move from confirmed inputs to an approved supply scope
- 01Share requirementsOpening schedule, quantity, destination and project use.
- 02Align configurationMaterial, hardware, operation, control and open technical questions.
- 03Sample & quotationReview the useful sample or drawing path and confirmed quote scope.
- 04Production & QCProceed after final requirements and approvals are confirmed.
- 05Packing & shippingPlan labeling, packing and freight from the confirmed scope.
FAQ
Questions buyers use to finalize this product brief
How do fabric Venetian blinds differ from aluminum Venetian blinds?
They use soft textile slats for a warmer visual effect; aluminum uses rigid metal slats and different material/finish characteristics.
What slat widths are documented?
Current product references include selected 35 mm and 50 mm series. Final series and material must be confirmed.
Can they provide room darkening?
Selected fabric directions may be discussed, but final opacity depends on exact material, slat overlap and installation.
Can the slats be motorized?
Selected motorized tilt configurations may be reviewed after slat, size, headrail, power and control are known.
What should be sampled?
Choose whether the approval depends on color, texture, opacity, slat scale or motorized tilt behavior.
Ready to Configure Fabric Venetian Blinds?
Send the opening schedule, product/material direction, operation, control requirements, quantity and destination. Final product and performance details will be tied to the confirmed configuration.